I'm starting a job painting the outside of a building its metal.I've used a inside paint sprayer for room.I was wondering if its used the same like priming,cleaning and how far to stand away from the building?How to use an industrial paint sprayer.?
if it is a truly industrial sprayer, you will have some differenges ,you will have to prime it a little longer,cleaning is the same,how far you stand from the building is relative to tip size,if there are nearby buildings very close ,use a smaller tip and stand closer to aviod the overspray,if you are clear of nearby buildings,then you can stand just as you would on the inside,if you think you are standing too close and have to spray too fast to avoid sags/runs turn the pressure down on the sprayer and find a comfortable distance for you to work effectivley from, the pressure will be a lot higher than you are used to ,our indusrial sprayers if run wide open at full pressure and empty a 55 gallon drum of paint in approx 30 minutes. good luck....painting contractorHow to use an industrial paint sprayer.?
use the same I hope it's airless that will help your production
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment